 |
| The eVic |
RM380 (MYR) - AVAILABLE NOW - (Limited Stock)
____________________________________________________________
 |
| The VAMO |
Description:
|
The iVapors -Vamo VV / VW MOD is the newest design Variable Voltage
model on the market today. It can automatically detect and display the
resistance of the different cartomizers. The output voltage can be adjusted
from 3.0 - 6.0V, and the working power is from 3.0 - 15W.
510 AND eGO thread, the Vamo Mod can work with almost all of the popular
Cartomizers & Atomizers, such as 306, JuiceMate, Vivi Nova, Kanger, DCT,
Clearomizer and many more !
Available in Chrome Finish only with optional button
colors. (Black or Chrome)
Adjustment + Button: Press the button to increase the voltage from 3.0v-6.0v
in 0.1V steps, in voltage mode when it reaches 6.0 v, it will round
robin to 3.0v.
Note: When device is in watt mode, it will increase watts from 3 watts to 15
watts in .5 watt increments.
Adjustment - Button: Press the button to decrease the voltage from
6.0v-3.0v in 0.1V steps, in voltage mode, when it reaches 6.0 v, it
will round robin to 6.0v.
Note :
Press the two buttons at the same time for 3 seconds, it change from volt
mode to watt mode or watt mold to volt mode.
Power Button: Press the power button 5 times, you can turn on / off the
device.
Press and hold + button to detect the resistance of the cartomizer.
Press and hold - button to detect the battery level voltage.
New Feature of Vamo V-V Mod
With the new detachable
design, the Vamo Mod can can work with 1pc 18650 battery or 2pcs 18350
batteries, also it can work with only 1pc 18350 battery.
Use battery extension tube when you want use 18650 battery or 2pcs 18350
batteries, omit battery extension if you only want use one 18350 battery.
More Features of Vamo Mod:
1) Short Circuit / Atomizer Protection.
2) Reverse Battery Protection.
3) Battery Monitoring / Over-Discharge Protection.
4) Amperage Limiting to 4.0amps.
5) Vent hole on the bottom of the device for added safety.
6) Having a power display function , the out put power can be detected and
displayed on the led screen 3.0 - 15.0 w.
7) Check the resistance of atomizer
Vamo instructions:
1: Output Voltage from
3.0V to 6.0V, adjusting the working volt +- 0.1V by pressing + and - buttons.
2: Keep pressing the +
button more than 3 sec, LCD screen displays the present working resistance.
3: Keep pressing the -
button more than 3 sec, the LCD screen showing the battery volt.
4: 5X click, LCD screen
displays " on " or " off ".
5: Output power 3W~15W.
6: Max Armature Current
5A.
7: on/off Mode allows
you to shut the unit off completely.
8: Reverse battery
protection keeps circuit safe if the battery is installed backward.
9: Battery Monitoring
shuts the unit off once battery has reached end of charge.
10: Amperage limiting
system protects against over current situations.
11: Thermal Monitoring
shuts the device off if it detects a high temperature condition.
12: Fit atomizers with
resistance 1.5~5.0ohm.
13: Time limit
protection function, it will shut down with more than 10s each puff.
14: LCD displays "
LO-Ω" if resistance lower than 1.2ohm, "LO-V" if short
circuit. BTW, VAMO support both AVG or RMS, keep pressing
" +" button more than 10sec, if LCD screen displays 001 means
AVG, 002 means RMS, loose the " +" button and keep pressing it more
than 10sec, you may change AVG to RMS or RMS to AVG.
Specification of Vamo Mod:
Weight of device: 500G
Outer Diameter: 22mm
Inner diameter:18.5mm
Two 18350 batteries length: 136mm
One 18350 batteries length: 105mm
Battery: 18350 / 18650
Voltage: 3V-6V
Output current: 0-2.5A
iVapors recommends the use of IMR non-protected Li-Ion Batteries. |
Package Contents:
- 1 x The Vamo / Variable Voltage & Variable Wattage Mod - Body Unit
- 2 x 18350 3.7V 900mAh Special Lithium Battery
- 1 x CE5 Clearomiser
- 1 x Gift Box
- 1 x Charger
RM280 (MYR) - OUT OF STOCK -
_________________________________________________________
 |
| LAMBO V4 |
The Lambo 4.0 Variable Voltage Mod
The latest Revision 4 of this popular device!
The
Lambo 4.0 is the most value-priced Mod in its class. The Lambo 4.0 is a
Variable Voltage E-Cig that allows you to set the voltage output in
increments of 0.1V. Go from 3.0V~6.0V with just a few clicks of a
switch. Set it to your preferred vaping voltage and puff away. This unit
uses a high capacity High Drain 18650 Battery.
Please note:
Some 18650 will not fit into this unit. The 18650 battery must be 18mm x
65mm in order to fit. Most 18650 batteries are slightly longer than
65mm.
List of compatible batteries:
Also, we suggest using atomizers or cartomizers of 2.4ohm or higher.
The Lambo 4.0 is packed with Features:
Aluminum body
1- power button
1- voltage up button
1- voltage down button
1- activation button
1- LCD screen, which shows the current voltage the device is set on.
1- 510 threaded
1- vented removable end cap w/ spring for battery tension
Compatible Atomizers and Cartomizers:
Tech Specs:
Selectable voltage from 3.0V~6.0V in 0.1V increments
Lambo 4.0 Body Unit Dimensions: 5.15"L x 0.86"D
Features:
Resistance Check *NEW*: Push the large activation button 5 times and the LCD will display the resistance of the attached atomizer or cartomizer.
Low Resistance Atomizers *NEW*: The Lambo will work with atomizer of 1.0 ohm or higher.
Ego Compatible *NEW*: The Lambo is compatible with most Ce4 Atomizers without the use of an adapter. Ego CE4 Plus will not fit.
Spring Loaded Center Post *NEW*:
Shake the unit and it may rattle. Don't be alarmed. This faint noise is
due to the newly designed spring loaded center post. This new center
post will preventing "post-pulling" and other related contact issues.
Power on/Off Button: hold the button down for 5 seconds to turn the device on, hold the button again for 5 seconds to turn the device off.
+ Button: On press, increases voltage by 0.1V increments between 3.0V~6.0V.
- Button: On press, decreases voltage by 0.1V increments between 3.0V~6.0V.
+ and – Button:
Press and hold both buttons for five second to disable the + and –
button, locking the device on the voltage it is currently set at.
Regulated output:
Keeps the voltage the same with each puff regardless of the remaining
battery power. As the battery drains, the device will keep the voltage
consistent.
10 Second Cutoff timer: If
the activation button is held down for 10 seconds or longer, the Lambo
4.0 will shut itself off until the button is released. To prevent
overheating the atomizer and the device.
Short Circuit/Atomizer Protection:
The Lambo 4.0 can recognize an atomizer with too low of a resistance
for the current voltage setting and will drop the voltage to 3.7V to
protect both the battery and atomizer. If the atomizer is too low or
shorted out the LCD will display "F1" and the device will shut off until
the issue is corrected.
Reverse Battery Protection: Protects the device in case you put the battery in the device backwards
Battery Monitoring/Over-Discharge Protection: The
device will monitor the battery voltage and automatically turn off when
the battery is discharged, preventing damage to the battery by overly
depleting it.
Battery Voltage Meter:
The Lambo 4.0 has a voltage meter built in, simply press the red power
button 6 times and it will display the voltage of the battery for a few
seconds. This way you can monitor the power left in the battery before
it needs to be recharged. 18650 batteries provide 4.2V at peak charge
and over the life of the battery that voltage will decrease to about
3.3V level before needing to be recharged. This will help you monitor
the life cycle of the battery. The LCD screen will flash when the
battery needs to be recharged, and will stop powering the device.
Amperage Limiting: The device should monitor and shut itself off if it detects any excessive over-current conditions.
Vent hole on the bottom of the device for added safety
** The
Lambo 4.0 body unit will include a 14 day Limited Warranty against any
manufacturing defects from the date of purchase. Scratches and
discoloration are considered normal wear and tear and is not covered by
warranty.
NOTE: Use special caution
when working with Li-ion cells, they are very sensitive to charging
characteristics and may explode or burn if mishandled. Make sure the
user has enough knowledge of Li-Ion rechargeable batteries in charging,
discharging and assembly before use. Always charge in/on a fire-proof
surface. Never leave charging batteries unattended. We are not
responsible for damage if there is any modification of the
batteries/chargers in any form or shape (including pack making). We are
not responsible for any damage caused by misuse or mishandling of Li-Ion
batteries and chargers. We only recommend using Lithium Ion
rechargeable batteries with a control circuit (protection PCB) to assure
safe charge, discharge, etc, use of lithium ion batteries without a
protection circuit is potentially hazardous
iVapors will
not be held responsible or liable for any injury, damage, or defect,
permanent or temporary that may be caused by the improper use of a
LI-ION battery. Please have a basic understanding of the batteries you
are using and how to care for them properly.
|
|
 |
 |
|
 |
 |
|
 |
|
Package Contents:
- 1 x Lambo 4.0 Variable Voltage Mod - Body Unit
- 2 x Rider 18650 3.7V 1800mAh NCM Battery
- 1 x 510 ATOMIZERS- 3ohm
- 1 x Zipper Case
- 1 x Charger
|
|
RM280 (MYR) - OUT OF STOCK -
_______________________________________________________________
